Question 1

When dimensioning a multiview drawing, shafts should be dimensioned on their top view.

Accepted Answer

A) True 
 B)False

Question 2

When describing the shape of an object with a multiview drawing, the first view chosen should be the _____ side.

Accepted Answer

A)   top
B)   bottom
C)   front
D)   backE) None of the above
F) A) and B)

Question 3

How many views do simple, flat objects require?

Accepted Answer

A)   one
B)   two
C)   three
D)   sixE) A) and B)
F) A) and D)

Question 4

Surfaces that lie on any angle to the plane of projection appear foreshortened.

Accepted Answer

A) True 
 B)False  True

Question 5

What is the correct order of line precedence?

Accepted Answer

A)   centerline, object line, cutting plane line, hidden line
B)   object line, hidden line, cutting plane line, centerline
C)   cutting plane line, object line, hidden line, centerline
D)   centerline, cutting plane line, object line, hidden lineE) None of the above
F) B) and D)

Question 6

What are the three basic views used in first-angle projection?

Accepted Answer

A)   front, right-side, and top
B)   front, left-side, and bottom
C)   front, top, and bottom
D)   front, right-side, and left-sideE) None of the above
F) A) and D)

Question 7

Imagine that you are creating a multiview drawing with an oblique surface. What should you do before blocking-in views?

Accepted Answer

A)   lay out features and centerlines
B)   lay out view locations
C)   darken and dimension
D)   add circles and hidden linesE) A) and D)
F) A) and C)

Question 8

Oblique surfaces are _____ to normal surfaces.

Accepted Answer

A)   parallel
B)   perpendicular
C)   either parallel or perpendicular
D)   neither parallel nor perpendicularE) A) and B)
F) None of the above

Question 9

The use of grid marks, orthographic projection lines, and different layers simplifies and increases the speed of preparing multiview drawings.

Accepted Answer

A) True 
 B)False

Question 10

You should always use the minimum number of views possible when describing the shape of an object with a multiview drawing.

Accepted Answer

A) True 
 B)False

Question 11

The hinge lines between planes of projection are known as _____ lines or reference lines.

Accepted Answer

A)   bisect
B)   fold
C)   multiview
D)   establishingE) B) and D)
F) A) and B)

Question 12

When preparing multiview drawings, most companies center the drawing on the drawing sheet.

Accepted Answer

A) True 
 B)False  False

Question 13

Imagine that you are centering a multiview drawing. If the drawing area is 12" high and 20" wide, and the object being drawn is 8" high and 12" wide, how far should the left side of the drawing be from the left side of the drawing area?

Accepted Answer

A)   2"
B)   4"
C)   8"
D)   12"E) None of the above
F) A) and B)

Question 14

Where should dimensions be placed on multiview drawings?

Accepted Answer

A)   largest amount of empty space on the page
B)   most descriptive view of the feature
C)   at the bottom of the page
D)   largest view of the featureE) A) and C)
F) A) and B) B

Question 15

When surfaces with round or smooth contours blend together, the merging surface is called a(n) :

Accepted Answer

A)   runout
B)   orthographic projection
C)   fold line
D)   ellipseE) C) and D)
F) A) and C)

Question 16

Holes and cylinders appear as:

Accepted Answer

A)   true circles on all surfaces
B)   ellipses on all surfaces
C)   true circles on normal surfaces and ellipses on inclined surfaces
D)   ellipses on normal surfaces and true circles on inclined surfacesE) B) and D)
F) C) and D)

Question 17

What can you determine by looking at the front view of an object?

Accepted Answer

A)   height and width
B)   depth and width
C)   depth and height
D)   height, depth, and widthE) A) and B)
F) All of the above

Question 18

An alternative to using reference lines to locate views is to draw a _____ line to project a third view once two base views are established.

Accepted Answer

A)   15º
B)   45º
C)   90º
D)   120ºE) C) and D)
F) B) and D)

Question 19

Imagine that you are creating a multiview drawing with circles and arcs. What should you do next after adding circles and arcs?

Accepted Answer

A)   add hidden lines
B)   darken and dimension
C)   lay out centerlines
D)   plan space between views for dimensionsE) C) and D)
F) A) and B)

Question 20

Vertical orthographic projections are used to align views with the same width dimensions.

Accepted Answer

A) True 
 B)False

Exam 8: Multiview Drawings

When dimensioning a multiview drawing, shafts should be dimensioned on their top view.

Correct AnswerverifiedShow Answer

When describing the shape of an object with a multiview drawing, the first view chosen should be the _____ side.

Correct AnswerverifiedShow Answer

How many views do simple, flat objects require?

Correct AnswerverifiedShow Answer

Surfaces that lie on any angle to the plane of projection appear foreshortened.

Correct AnswerverifiedTrue

What is the correct order of line precedence?

Correct AnswerverifiedShow Answer

What are the three basic views used in first-angle projection?

Correct AnswerverifiedShow Answer

Imagine that you are creating a multiview drawing with an oblique surface. What should you do before blocking-in views?

Correct AnswerverifiedShow Answer

Oblique surfaces are _____ to normal surfaces.

Correct AnswerverifiedShow Answer

The use of grid marks, orthographic projection lines, and different layers simplifies and increases the speed of preparing multiview drawings.

Correct AnswerverifiedShow Answer

You should always use the minimum number of views possible when describing the shape of an object with a multiview drawing.

Correct AnswerverifiedShow Answer

The hinge lines between planes of projection are known as _____ lines or reference lines.

Correct AnswerverifiedShow Answer

When preparing multiview drawings, most companies center the drawing on the drawing sheet.

Correct AnswerverifiedFalse

Imagine that you are centering a multiview drawing. If the drawing area is 12" high and 20" wide, and the object being drawn is 8" high and 12" wide, how far should the left side of the drawing be from the left side of the drawing area?

Correct AnswerverifiedShow Answer

Where should dimensions be placed on multiview drawings?

Correct AnswerverifiedB

When surfaces with round or smooth contours blend together, the merging surface is called a(n) :

Correct AnswerverifiedShow Answer

Holes and cylinders appear as:

Correct AnswerverifiedShow Answer

What can you determine by looking at the front view of an object?

Correct AnswerverifiedShow Answer

An alternative to using reference lines to locate views is to draw a _____ line to project a third view once two base views are established.

Correct AnswerverifiedShow Answer

Imagine that you are creating a multiview drawing with circles and arcs. What should you do next after adding circles and arcs?

Correct AnswerverifiedShow Answer

Vertical orthographic projections are used to align views with the same width dimensions.

Correct AnswerverifiedShow Answer

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
True

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
False

Correct Answer
verified

Correct Answer
verified
B

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified